PRODUCTS
Product categories
Recommended Products
Processing materials range: Round materials: Φ4mm - Φ12mm; Square materials: 4mm - 11mm; S4mm-S12mm
Processing (drawing) materials: Non-ferrous metals and ferrous metals
Rated drawing force: 4t (40KN)
Drawing speed: 0 - 60 m/min (variable frequency speed control)
Processing length: 2 - 4m; Shear accuracy ±5mm
Finished product surface roughness: Ra0.4 - Ra1.6 μm;
Finished product straightness: ≤0.3mm/m;
Product outer diameter tolerance: ±0.01mm (positive and negative tolerance of mold drawing is ±0.01mm, polishing accuracy is ±0.01mm)
Power phase number: 3
Power frequency: 50 Hz
Power voltage: 380V
Main motor power: 45KW (AC)
Set total power: 90KW
Set weight: 18t
Processing (drawing) materials: Non-ferrous metals and ferrous metals
Rated drawing force: 4t (40KN)
Drawing speed: 0 - 60 m/min (variable frequency speed control)
Processing length: 2 - 4m; Shear accuracy ±5mm
Finished product surface roughness: Ra0.4 - Ra1.6 μm;
Finished product straightness: ≤0.3mm/m;
Product outer diameter tolerance: ±0.01mm (positive and negative tolerance of mold drawing is ±0.01mm, polishing accuracy is ±0.01mm)
Power phase number: 3
Power frequency: 50 Hz
Power voltage: 380V
Main motor power: 45KW (AC)
Set total power: 90KW
Set weight: 18t
Number of views:
1000
Keywords:
wheel straightening
wire straightening
wire straightening machine
bar straightening machine
Production Capacity: 5-60 tons
Furnace Door Type: Straight
Furnace Type: Fixed
Melting Rate: 2-8 tons of aluminum/hour
Gas Pressure: 65-100 kPa
Temperature Accuracy: ±5°C
Gas Consumption Range: ≥52 cubic meters/ton* of aluminum
Maximum Operating Temperature: 1050°C
Maximum Control Temperature: 1100°C
Furnace Door Type: Straight
Furnace Type: Fixed
Melting Rate: 2-8 tons of aluminum/hour
Gas Pressure: 65-100 kPa
Temperature Accuracy: ±5°C
Gas Consumption Range: ≥52 cubic meters/ton* of aluminum
Maximum Operating Temperature: 1050°C
Maximum Control Temperature: 1100°C
Number of views:
1000
Keywords:
Model：GYT-120 melting furnace
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Number of views:
1000
Keywords:
Model：LSD-40
Processing range：Φ10-40mm
Speed：50 m/min
Power：5.5KW*2
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is used for fine straightening of brass pipe rods, bronze pipe rods, aluminum pipe rods, copper pipe rods and other metal pipe rods.
Processing range：Φ10-40mm
Speed：50 m/min
Power：5.5KW*2
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is used for fine straightening of brass pipe rods, bronze pipe rods, aluminum pipe rods, copper pipe rods and other metal pipe rods.
Number of views:
1000
Keywords:
Steel Rod Straightening Machine
copper rod straightening machine
aluminum bar straightening machine
Model：GYT-120 melting furnace
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Number of views:
1000
Keywords:
浏览量:
1000
Hydraulic alligator shear scrap metal shearing machine
Classification
Other Equipment
Processing range：S10-40mm
Speed：35 m/min
Power：5.5KW*2,400W*13
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
零售价
0.0
Yuan
市场价
0.0
Yuan
浏览量:
1000
产品编号
数量
-
+
库存:
0
1
Product Details
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
—— Alligator Shear ——
Hydraulic crocodile shears are suitable for recycling companies, automobile dismantling plants, and smelting and casting industries to cold-cut steel and metal structural parts into qualified furnace materials.
—— EQUIPMENT SHIPMENT ——
Ships three or four times a week on average
—— INSTALLATION & COMMISSIONING ——
Provide professional technicians for overseas debugging
—— SUCCESS CASE ——
Complete production line
—— FANSHUN TEAM ——
About Foshan Fanshun Machinery Co., Ltd.
Recommended Products
Processing materials range: Round materials: Φ4mm - Φ12mm; Square materials: 4mm - 11mm; S4mm-S12mm
Processing (drawing) materials: Non-ferrous metals and ferrous metals
Rated drawing force: 4t (40KN)
Drawing speed: 0 - 60 m/min (variable frequency speed control)
Processing length: 2 - 4m; Shear accuracy ±5mm
Finished product surface roughness: Ra0.4 - Ra1.6 μm;
Finished product straightness: ≤0.3mm/m;
Product outer diameter tolerance: ±0.01mm (positive and negative tolerance of mold drawing is ±0.01mm, polishing accuracy is ±0.01mm)
Power phase number: 3
Power frequency: 50 Hz
Power voltage: 380V
Main motor power: 45KW (AC)
Set total power: 90KW
Set weight: 18t
Processing (drawing) materials: Non-ferrous metals and ferrous metals
Rated drawing force: 4t (40KN)
Drawing speed: 0 - 60 m/min (variable frequency speed control)
Processing length: 2 - 4m; Shear accuracy ±5mm
Finished product surface roughness: Ra0.4 - Ra1.6 μm;
Finished product straightness: ≤0.3mm/m;
Product outer diameter tolerance: ±0.01mm (positive and negative tolerance of mold drawing is ±0.01mm, polishing accuracy is ±0.01mm)
Power phase number: 3
Power frequency: 50 Hz
Power voltage: 380V
Main motor power: 45KW (AC)
Set total power: 90KW
Set weight: 18t
Number of views:
1000
Keywords:
wheel straightening
wire straightening
wire straightening machine
bar straightening machine
Production Capacity: 5-60 tons
Furnace Door Type: Straight
Furnace Type: Fixed
Melting Rate: 2-8 tons of aluminum/hour
Gas Pressure: 65-100 kPa
Temperature Accuracy: ±5°C
Gas Consumption Range: ≥52 cubic meters/ton* of aluminum
Maximum Operating Temperature: 1050°C
Maximum Control Temperature: 1100°C
Furnace Door Type: Straight
Furnace Type: Fixed
Melting Rate: 2-8 tons of aluminum/hour
Gas Pressure: 65-100 kPa
Temperature Accuracy: ±5°C
Gas Consumption Range: ≥52 cubic meters/ton* of aluminum
Maximum Operating Temperature: 1050°C
Maximum Control Temperature: 1100°C
Number of views:
1000
Keywords:
Model：GYT-120 melting furnace
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Number of views:
1000
Keywords:
Model：LSD-40
Processing range：Φ10-40mm
Speed：50 m/min
Power：5.5KW*2
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is used for fine straightening of brass pipe rods, bronze pipe rods, aluminum pipe rods, copper pipe rods and other metal pipe rods.
Processing range：Φ10-40mm
Speed：50 m/min
Power：5.5KW*2
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is used for fine straightening of brass pipe rods, bronze pipe rods, aluminum pipe rods, copper pipe rods and other metal pipe rods.
Number of views:
1000
Keywords:
Steel Rod Straightening Machine
copper rod straightening machine
aluminum bar straightening machine
Model：GYT-120 melting furnace
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Number of views:
1000
Keywords:
Get In Touch From Message
In order to know more about our products, we recommend new products. If you need to leave your contact information, we will send you an electronic atlas.
Online message
Description:
