PRODUCTS
Product categories
SMALL METAL CHIP BRIQUETTING MACHINE
Model: SBJ-3KW
Equipment weight：550kg
Power：3kw
Rated frequency：50 hz
Principle：It is mainly a mechanical equipment that uses hydraulic oil as the working medium to compress different raw materials through the transmission pressure of the hydraulic system
Application：Used for aluminum, iron, steel, shavings and other metal chips
Equipment weight：550kg
Power：3kw
Rated frequency：50 hz
Principle：It is mainly a mechanical equipment that uses hydraulic oil as the working medium to compress different raw materials through the transmission pressure of the hydraulic system
Application：Used for aluminum, iron, steel, shavings and other metal chips
LHL-4 Combined Drawing Machine
Processing materials range: Round materials: Φ4mm - Φ12mm; Square materials: 4mm - 11mm; S4mm-S12mm
Processing (drawing) materials: Non-ferrous metals and ferrous metals
Rated drawing force: 4t (40KN)
Drawing speed: 0 - 60 m/min (variable frequency speed control)
Processing length: 2 - 4m; Shear accuracy ±5mm
Finished product surface roughness: Ra0.4 - Ra1.6 μm;
Finished product straightness: ≤0.3mm/m;
Product outer diameter tolerance: ±0.01mm (positive and negative tolerance of mold drawing is ±0.01mm, polishing accuracy is ±0.01mm)
Power phase number: 3
Power frequency: 50 Hz
Power voltage: 380V
Main motor power: 45KW (AC)
Set total power: 90KW
Set weight: 18t
Processing (drawing) materials: Non-ferrous metals and ferrous metals
Rated drawing force: 4t (40KN)
Drawing speed: 0 - 60 m/min (variable frequency speed control)
Processing length: 2 - 4m; Shear accuracy ±5mm
Finished product surface roughness: Ra0.4 - Ra1.6 μm;
Finished product straightness: ≤0.3mm/m;
Product outer diameter tolerance: ±0.01mm (positive and negative tolerance of mold drawing is ±0.01mm, polishing accuracy is ±0.01mm)
Power phase number: 3
Power frequency: 50 Hz
Power voltage: 380V
Main motor power: 45KW (AC)
Set total power: 90KW
Set weight: 18t
Reverberatory Furnace
Production Capacity: 5-60 tons
Furnace Door Type: Straight
Furnace Type: Fixed
Melting Rate: 2-8 tons of aluminum/hour
Gas Pressure: 65-100 kPa
Temperature Accuracy: ±5°C
Gas Consumption Range: ≥52 cubic meters/ton* of aluminum
Maximum Operating Temperature: 1050°C
Maximum Control Temperature: 1100°C
Furnace Door Type: Straight
Furnace Type: Fixed
Melting Rate: 2-8 tons of aluminum/hour
Gas Pressure: 65-100 kPa
Temperature Accuracy: ±5°C
Gas Consumption Range: ≥52 cubic meters/ton* of aluminum
Maximum Operating Temperature: 1050°C
Maximum Control Temperature: 1100°C
little melting pot
Model：GYT-120 melting furnace
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Centerless lathe
Model：LSD-40
Processing range：Φ10-40mm
Speed：50 m/min
Power：5.5KW*2
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is used for fine straightening of brass pipe rods, bronze pipe rods, aluminum pipe rods, copper pipe rods and other metal pipe rods.
Processing range：Φ10-40mm
Speed：50 m/min
Power：5.5KW*2
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is used for fine straightening of brass pipe rods, bronze pipe rods, aluminum pipe rods, copper pipe rods and other metal pipe rods.
GYT-120 melting furnace
Model：GYT-120 melting furnace
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Melting Rate： copper：500kg/h brass：600kg/h
Power： 120kw
Principle：The metal is heated and melted by the huge induced current in the melting channel as the secondary of the transformer. Due to the action of electromagnetic force, the liquid metal is forced to move along the melting channel, so that the whole metal is continuously heated.
Application：Store brass solution, cast brass rod/tube
Material opening elevator
Model：
Cutting diameter：Φ8-45mm
Maximum cutting length：120mm
Working frequency：10-100pice/min
Principle：
Application：Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Cutting diameter：Φ8-45mm
Maximum cutting length：120mm
Working frequency：10-100pice/min
Principle：
Application：Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Fully automatic bar cutting machine
Model：
Cutting diameter：Φ8-45mm
Maximum cutting length：120mm
Working frequency：10-100pice/min
Principle：
Application：Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Cutting diameter：Φ8-45mm
Maximum cutting length：120mm
Working frequency：10-100pice/min
Principle：
Application：Used for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
CM0516-PLC Double head chamfering machine
model：CM0516
Applicable rod diameter (mm)：2000-4000
power：14kw
weight：1150kg
Principle：The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application：
Applicable rod diameter (mm)：2000-4000
power：14kw
weight：1150kg
Principle：The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application：
LD-60 Vertical Multi-Roller Straightening Machine
Model：
Processing range：S160mm-425mm
Speed：40 m/min
Power：75*2kw
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
Processing range：S160mm-425mm
Speed：40 m/min
Power：75*2kw
Principle：The bending part of the metal bar is subjected to a considerable reverse bending or tensile force, so that the bar produces a certain elastic-plastic deformation. When the external force is removed, the bar undergoes elastic recovery to achieve a straightening effect.
Application：This machine is suitable for straightening non-circular special-shaped materials such as hexagonal and square shapes.
Previous page
1
2
…
16
Next page
