PRODUCTS
Product categories
Recommended Products
Model：TQ-8
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Number of views:
1000
Keywords:
wheel straightening
wire straightening
wire straightening machine
bar straightening machine
Fuel consumption: 40（kg/h）
Air supply pressure: 5-7（MPa）
weight: 45（t）
Principle：A device for mixing and burning natural gas and air in a certain way
Application：PLC control cabinet is adopted, which is fully burnt, with high thermal efficiency and fuel saving
Air supply pressure: 5-7（MPa）
weight: 45（t）
Principle：A device for mixing and burning natural gas and air in a certain way
Application：PLC control cabinet is adopted, which is fully burnt, with high thermal efficiency and fuel saving
Number of views:
1000
Keywords:
Frequency:50 (Hz)
Main motor power：160（KW）
Rated current：288 (A)
Speed：1500 (RPM)
Principle:
Application:
Main motor power：160（KW）
Rated current：288 (A)
Speed：1500 (RPM)
Principle:
Application:
Number of views:
1000
Keywords:
Rated capacity：1T
Melting furnace：1T/h
Power factor:≥0.85
Rated temperature：1600℃
Principle：When the induced current passes through the furnace charge, the furnace charge will be heated to make it melt
Application：Aluminum shell medium frequency furnace is mainly used for smelting non-ferrous metals (such as copper and aluminum) to improve temperature and heat preservation
Melting furnace：1T/h
Power factor:≥0.85
Rated temperature：1600℃
Principle：When the induced current passes through the furnace charge, the furnace charge will be heated to make it melt
Application：Aluminum shell medium frequency furnace is mainly used for smelting non-ferrous metals (such as copper and aluminum) to improve temperature and heat preservation
Number of views:
1000
Keywords:
浏览量:
1000
RG-500 Crucible fuel gas furnace
Classification
Crucible Furnace
Capacity:200 kg
Melting Rate：300 kg/h
Principle：It is melted in the crucible, and the heat is transferred to the furnace charge through the crucible. The furnace charge is a kind of combustion product. The metal liquid has good fluidity and castability, and is suitable for casting and molding of various moulds
Application：Mainly used to melt nonferrous metals with low melting point, such as copper, aluminum and their alloys
零售价
0.0
Yuan
市场价
0.0
Yuan
浏览量:
1000
产品编号
数量
-
+
库存:
0
1
Product Details
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
—— CRUCIBLE GAS FUEL OIL FURNCE ——
Used for melting non-ferrous metals with low melting point, such as copper, aluminum, zinc, etc.
—— STANDARD SIZES ——
Detailed parameters of the equipment
| Model | Capacity（kg） | Melting speed（kg/h） | energy consumption |
| 300 | 200 | 300 | natural gas 120-150m³/t diesel dye 120-150kg/t |
| 500 | 500 | 300 | |
| 1000 | 1000 | 300 | |
| 1500 | 1500 | 300 |
—— EQUIPMENT SHIPMENT ——
Ships three or four times a week on average
—— INSTALLATION & COMMISSIONING ——
Provide professional technicians for overseas debugging
—— SUCCESS CASE ——
Complete production line
—— FUTUER TEAM ——
About GuangDong Futuer Machinery Co., Ltd.
上一个
无
Recommended Products
Model：TQ-8
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Normal length error: round steel ± 8mm, deformed steel ± 1.5mm
National standard copper wire of motor ：5.5KW
Host size ：1300mm * 530mm * 800mm
Straightening speed： 31-45m/min
Principle：The motor drives the belt drive and can rotate the straightening cylinder at high speed to straighten the steel bars passing through the straightening cylinder and remove the rust on the surface of the steel bars; The electric motor can drive two conveying and pressing rollers through another pair of decelerating belt drives and gear reduction boxes, which can lead the steel bar to move forward. On the other hand, it can drive the crank wheel, which can promote the hammer head to move up and down. When the reinforcement is adjusted to a predetermined length, the hammer head will hammer on the knife rest to cut the reinforcement. When the cut reinforcement falls into the receiving frame, it will be subjected to the elastic force of the spring, and the knife rest will return to its original position, completing a work cycle.
Application：Straightening and cutting machines have the characteristics of fast speed, small error, no wire running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products and handicraft production.
Number of views:
1000
Keywords:
wheel straightening
wire straightening
wire straightening machine
bar straightening machine
Fuel consumption: 40（kg/h）
Air supply pressure: 5-7（MPa）
weight: 45（t）
Principle：A device for mixing and burning natural gas and air in a certain way
Application：PLC control cabinet is adopted, which is fully burnt, with high thermal efficiency and fuel saving
Air supply pressure: 5-7（MPa）
weight: 45（t）
Principle：A device for mixing and burning natural gas and air in a certain way
Application：PLC control cabinet is adopted, which is fully burnt, with high thermal efficiency and fuel saving
Number of views:
1000
Keywords:
Frequency:50 (Hz)
Main motor power：160（KW）
Rated current：288 (A)
Speed：1500 (RPM)
Principle:
Application:
Main motor power：160（KW）
Rated current：288 (A)
Speed：1500 (RPM)
Principle:
Application:
Number of views:
1000
Keywords:
Rated capacity：1T
Melting furnace：1T/h
Power factor:≥0.85
Rated temperature：1600℃
Principle：When the induced current passes through the furnace charge, the furnace charge will be heated to make it melt
Application：Aluminum shell medium frequency furnace is mainly used for smelting non-ferrous metals (such as copper and aluminum) to improve temperature and heat preservation
Melting furnace：1T/h
Power factor:≥0.85
Rated temperature：1600℃
Principle：When the induced current passes through the furnace charge, the furnace charge will be heated to make it melt
Application：Aluminum shell medium frequency furnace is mainly used for smelting non-ferrous metals (such as copper and aluminum) to improve temperature and heat preservation
Number of views:
1000
Keywords:
Get In Touch From Message
In order to know more about our products, we recommend new products. If you need to leave your contact information, we will send you an electronic atlas.
Online message
Description:
